Vantec UGT-ST320R User Manual

4-Port SATA 150 PCI Combo Host Card w/RAID User Manual Model: UGT-ST320R All brand names and trademarks ar

UGT‐ST320R Page10 Rebuilding a Failed Mirror Set When a failure to one member occurs, you will be notified either by the RAID BIOS during boot or b

UGT‐ST320R Page11 Resolving Conflicts When a RAID set is created, then metadata written to the disk includes drive connection information. If, afte

UGT‐ST320R Page12 Fyour system starts up. If the BIOS doesn’t show, please try your controller in another PCI slot. During this (POST) process, the

UGT‐ST320R Page13 on-screen instructions to complete the Windows installation. For An Existing Installation 1. Setup the RAID Array prior to driv

UGT‐ST320R Page14 3. At the Windows Setup screen, press F6 to install the RAID driver.4. When prompted, press S to specify the location of the dr

UGT‐ST320R Page15 A new installation requires a floppy disk for the driver installation. To make this floppy disk, copy the contents of the UGT-ST

then click Next. 3. Insert the driver CD, select Install the software automatically (Recommended), and click Next. 4. Click Finish 5. Restart Wi

Device Manager. 2. When the Device Manager window appears, click on the next to other device to expacnd the list. Right-click”RAID Controller” and s

UGT‐ST320R Page18 (D:\UGT-ST320R\Win7 64-bit), then press Next. (Change D:\ to match your CD-ROM drive letter) 4. Follow the on-screen instructio

To Verify Driver Installation 1. Right click My Computer and click Manage. 2. Select Device Manager. 3. Look for the following: Windows® 2000/XP_20

UGT‐ST320R Page2 Features z Silicon Image SiI3512 SATA controller chip z Compliant with PCI Specification, Rev. 2.3 z Compliant with Serial ATA

UGT‐ST320R Page20 Warranty The Vantec 4-Port SATA 150 PCI Combo Host Card w/RAID comes with a 1 year limited warranty(90 day parts). If your unit b

UGT‐ST320R Page3 Package Contents z Vantec 4-Port SATA 150 PCI Combo Host Card w/RAID x 1 z SATA Cables x 2 z Installation Guide x 1 z Driver C

E (Jumper Settings) JP Description Active Port 1-2 close Enable SATA Port C J1-J4 2-3 close Enable SATA Port A 1-2 close Enable SATA Por

UGT‐ST320R Page5 Hardware Installation 1. Turn off the power to your computer and any other connected peripheral devices. 2. Unplug the power cor

UGT‐ST320R Page6 4. Attach the other end of the Serial ATA cable to the Serial ATA port on the SATA 150 PCI Raid Card 2-Channel 5. Follow the sam

UGT‐ST320R Page7 2. At the next screen select Create RAID Set, then press Enter. 3. Select Striped, then press Enter. 4. Select Auto configurati

UGT‐ST320R Page8 8. When asked Are You Sure(Y/N)?, press Y to accept. 9. Press Ctrl+E to exit the BIOS. 10. When asked Are you sure to exit(Y/N)

UGT‐ST320R Page9 For Existing Hard Drives with Data 1. As the BIOS boots press Ctrl+S or F4 when prompted to enter the RAID BIOS. 2. At the next