Vantec LX ULTRA User Manual

USER’S MANUALCopyright 2009 Vantec Thermal Technologies. All Rights Reserved.

85.2 How to find the NexStar LX Ultra :Installation(1) Find and execute “SDisk jar” from the CD and begin the search for the NAS device. ( F

9Installation(4) After entering the web UI, please select a language of your choice. ( Figure 5.2-C ) (1) Click on “Disk Utility” located on th

10Status Page(4) By clicking "Status", you will see information pertaining to your NAS and Hard Drive. ( Figure 5.3-C )(1) Click on

11Status Page(1) Click on "Change". ( Figure 6.2-A )(2) Enter desired password. Retype the password once more and press "OK"

12FTP Server7.1 Creating a new FTP accountThe FTP Tab allows you to easily setup your FTP Server. You may manage accounts and control the files/folder

7.2 Modifying the FTP user account(1) Select the account you wish to modify. When selected, click on the "Modify". ( Figure 7.2-

Here you can share the folder for established user :(2) Begin by choosing a folder from the Folder List you wish to share with the user. Pre

(2) You may change the user's password and access authority. When finished, click "Modify". ( Figure 8.2-B )(1) Select the us

(2) Begin by choosing a folder from the Folder List you wish to share with the user. Press the "Direction Arrow" button

17SMB Server(1) Open up "My Network Places". ( Figure 8.6-A )(2) Double click “Workgroup”. ( Figure 8.6-B )8.6.Logging into the NAS by

Package Contents:NexStar® LX Ultra USB CableeSATA CableRJ45 Ethernet CableSATA to eSATA BracketPower AdapterUser’s ManualScrewsUser's CD123567894

18IP ConfigurationHere you can change the NAS to either automatically obtained an IP address or manually set a static IP. When set to Automatic, the N

10. Printer Setup19Printer Setup(1) Plug the printer into the USB Printer Port.( Figure 10- A ) (2) Ensure the printer is installed on the

20Printer Setup(7) Select "Create a new port" and choose " Standard TCP/IP". When finished, click "Next". ( Fig

21Printer Setup(11) Select "Custom" and click "Next". ( Figure 10-K ) (9) Type the IP Address in the "Printer Na

22Printer Setup(12) Select Protocol "LPR" and in the LPR Settings under Queue Name type "LP1" as shown in the pictur

11.1. iTunes11. Media Server23Media ServerThe Media Server is a powerful tool that allows the NAS to host an array of files on the network. Photos, m

This product can upload many BitTorrent™ files at the same time however when downloading, there is a max that can be downloaded at one time. The LX Ul

25How to use BT download(1) In this example, Microsoft Outlook will be used.(2) Select "Accounts" in "Tools". ( Figure 1

26How to use BT download(5) Type the "Account name and Password" for the Outgoing Mail Server. Make sure this information is also

On the maintenance page, you are able to do Firmware Upgrades, preform a System Reboot and restore Factory Defaults. ( Figure 13.1-A )(2) Check to mak

1. Introduction ... 02 2. Specifications /

( Figure 13.2-A )( Figure 13.3-A )28Maintenance PageA reboot of the NAS is possible without the need of powering off. If you feel thenetwork or NAS is

14.3. Scan DiskClick on "Start" to begin the scanning of the hard disk. Once complete, a report will be displayed; Number of Files, Number o

(1) Power off the NexStar® LX Ultra. ( Figure 15-A )(2) Press and hold the reset button while you turn on the LX Ultra. ( Figure 15-

Warranty/ Contact 3116. Warranty: 17. Contact : Vantec Thermal Technologies 43951 Boscell Rd. Fremont, CA 94538 tel: 510-668-0368 fax: 510-668-036

Introduction 2NST-475LX-BK1. Introduction:Introducing the sleek contemporary design of the Vantec NexStar® LX Ultra—blending the finest functions of a

• Easy-To-Use Web Control Panel• Gigabit Ethernet Supports 10/100/1000 Mbps• FTP & SMB Server To Store And Share Your Files• Media Server To Strea

3. System Requirements:System Requirements4Microsoft Windows 2000/2003 server/XP x86/XP 64 bit/Vista X86/Vista 64 bit1. USB port, internal SATA port,

SATA/Power connectorNexStar LX Ultra Gigabit NAS Hard Drive Enclosure®4. Parts Layout: Parts Layout 5

NexStar LX Ultra Gigabit NAS Hard Drive Enclosure®5. Installation: Installation 6(1) Unscrew the screws on the underbody as shown. ( Figure 5.1-

Installation 7( Figure 5.2-D )(3) Slide the hard drive tray back into the LX Ultra and re-screw the screws back on to the underbody. ( Figu