Vantec EZ Swap 2 User's Guide download pdf (Page 9)

Aluminum Mobile Rack 3-9

To insert the Mobile Rack drive case:

1.Insert the Mobile Rack drive case (with drive installed) into the installed Mobile

Rack docking case and push ﬁrmly until the drive is seated.

2.Insert the key and turn it right to lock.

e LED on the Mobile Rack should

light after a slight delay. e installed Mobile Rack device is ready to use.

remove the Mobile Rack drive case:

1.Insert the key and turn it left to unlock.

Note that the power LED on the

Mobile Rack should now be OFF.

2.Gently pull on the Mobile Rack handle to slide the drive case out.

WARNIN

•DO NOT remove the drive case while the drive is working.

Damage to data may result.

•e Key-Lock must be in the Lock position while in use.

Key-Lock in

Lock Position

Key-Lock in

Unlock

Position

3-3 Using the Mobile Rack

1 2 3 4 5 6 7 8 9 10

No comments

Vantec EZ Swap 2 User's Guide Page 9