Vantec NST-375LX-BK Datasheet download pdf (Page 10)

Installation

Connecting the NexStar LX to your computer via network:

1) If you have the USB cable connected, disconnect it.

2) Connect the power cable to the NexStar LX and plug the cable into an

available outlet.

3) Connect the NexStar LX to the network using a straight through patch cable.

4) Turn on the NexStar LX via the power switch.

5.2. Logging in to the NexStar LX:

1) Windows ME/XP/2000

Open your browser and type STORAGE or if connected directly to your

computer type 169.254.0.1. If you have more than one device connected at

the same time, type STORAGE-xxxx, whereas the xxxx stands for the last four

digits of your Mac address as seen on the bottom of your device (example

STORAGE-2343).

Mac OS

Open your Terminal and type “nmblookup STORAGE”, copy the corresponding

IP address and paste it into your browser or if the LAN disk is connected

directly to your computer, type 169.254.0.1 into your browser. If you have

more than one device connected at the same time, type “nmblookup

STORAGE-xxxx, whereas the xxxx stands for the last four digits of your Mac

address as seen on the bottom of your device (example STORAGE-2343).

2) A pop-up dialog box will appear prompting you for your username and

password.

Default Settings:

Username: admin

Password: admin

We strongly suggest you to change this, as soon as you are logged in, to

prevent unauthorized access.

If you forgot your personal login, press and hold the reset button, turn on the

device and wait for ten seconds before releasing it. This will reset the device

to its factory default setting.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 25 26

No comments

Vantec NST-375LX-BK Datasheet Page 10