Copyright © 2010 Vantec Thermal Technologies. All Rights Reserved.User’s Manual
8Note: We strongly suggest you to change the password as soon as you logged in to prevent unauthorized access.4.4 Date/Time settingYou can change time
94.5.1 PPPoE SettingPPPoE (Point-to-Point Protocol over Ethernet) is an internet connection protocol allowing users to connect to the internet without
104.6 Disk ToolIn this page, you can manage the hard disk setting.- Format: For the rst time installation, you need to format the hard disk into FAT3
114.7 MaintenanceThis page allows you to update the NexStar FX NAS rmware, to go back to the default settings, or to reboot the NAS system.- Firmware
125. SAMBA Server (SMB)SMB server allows you to share data or les through LAN environment. A default “guest” folder is created and shared to all user
13Here, we name the account “User1” to demonstrate, enter password and click “Next” to enter share management.You can “Run” from Windows start button,
14Now you have successfully set up the folder that you wish to share on your NexStar FX NAS. This folder can be accessed from other computers on your
155.2 How to modify user account passwordSelect the account name (“User1”) and than click “Modify”.Enter new password and click “Apply” to save settin
166. FTP ServerRemember to “Enable” the FTP service on the status page, when you plan on using FTP server.FTP Server Conguration: The standard port f
176.1 How to create FTP accountFTP server allows you to share your data through internet, so an internet resource and router isrequired before setting
Package Contents:1 NextStar FX Gigabit NAS Adapter x12 AC Adapter x13 Installation Guide x14 Rubber Feet x45 User’s CD x16 Ethernet Cable x17 U
18Note: When creating FTP accounts, please use ONLY English alphabet and no special charac-ter or space for FTP account name.6.2 How to delete FTP acc
197. Media Server Connection-Xbox / PS37.1 XboxWhen you turn on the Xbox 360, DLNA Media Servers on the same network are automatically detected.1. Mov
202. Choose the DLNA media server that was connected and select the le you want to play.7.1 PS3™When you turn on the PS3™ system, DLNA Media Servers
211. Select the icon of the DLNA Media Server that you want to connect to under (Photo), (Music), or (Video). All available folders and les th
228. Printer Server1. Firstly, install your Printer driver into your computer, (for example. if Epson PL-6200L Printeris connected to the NAS, you mus
234. Select “Create a new port,” “Type of port:”, choose “Standard TCP/IP Port”, and click “Next” to continue.
245. Enter the NexStar FX NAS IP address (Eg. 192.168.15.100), then click “Next” to continue.6. Select “Custom” and go to “Setting”.
257. Select “LPR” in protocol, and give a queue name E.g. LRxxx; select LPR byte enable and click “OK” to nish the port setting.8. Click “Finish” to
269. Mac Installation (Mac 10.5.4 or above)9.1 Finding NexStar FX’s IP Using the Search Disk Utility (SDisk.jar)1. Copy the software tool “SDisk.jar”
279.2 How to Access Files Using SMB(Samba)1. Click ‘Go’ and navigate to ‘Computer’ or use Shift-Command-C.2. If the NexStar FX is in the same Workgrou
1Table of Contents1. Product Introduction / Features2. Parts Layout3. NexStar FX NAS Manager 4. NexStar FX NAS GUI5. SAMBA Server (SMB)6.
283. After you enter into the NexStar FX you can choose the existing folders and access its contents.4. You will be prompted for log in. You can use “
299.3 How to Access the NexStar FX Using ‘Connect to Server’ 1. Click ‘Go’ and navigate to ‘Connect to Server...’ or use Command-K.2. Type in the foll
304. Once the authentication has gone through, the NexStar FX folder will be listed under“ ”
3110. Mapping Network DrivesBelow are directions to map the shared folders on your NexStar FX Gigabit NAS Adapter as Network Drives on your computer s
3211.Q&AQ: What is NexStar FX NAS’s default IP?A: The default IP address is 169.254.0.1 or enter “NST-600NU” in IE browser bar to search for it.Q:
33Q: How do I access NexStar FX NAS via the Internet?A: If your NexStar FX NAS is congured with a xed public IP, please perform the following steps.
3412. WarrantyThe NexStar FX Gigabit NAS Adapter comes with a 1 year limited warranty (90 days parts). If your unit should become defective within tha
21. Product Introduction / FeaturesThank you for purchasing NexStar FX Gigabit NAS Adapter. Now you can easily install the NexStar FX Gigabit NAS Adap
32. Parts LayoutLAN ConnectionOperation SystemPower IndicatorConnect to LANReset ButtonConnect to USB StorageConnect Power AdapterConnect to USB Print
43. NexStar FX NAS Manager 3.1 Search NexStar FX Gigabit NAS Adapter by SearchDisk1. Run the Utility CD enclosed in package and navigate to the “Searc
53.2 Search NexStar FX Gigabit NAS Adapter by using Windows Internet Explorer.1. Open IE browser and type in the default host name “NST-600NU” in the
64. NexStar FX NAS GUINexStar FX NAS supports multi-language user interface. Please click on the respective ags to select your language.4.1 Hard Disk
74.2 StatusThis tab provides the basic information for the NexStar FX Gigabit NAS Adapter. Users can check r m w a re version and available hard d
Comments to this Manuals