MANUAL
7.Driver Installation: Windows ME/ XP/ 2000/ Vista 1) No drivers are necessary when using Windows ME/ XP/ 2000/ Vista. If the hard drive does not app
8. Creating a New Partition / Formatting The Hard Drive: Note: Most hard drives should come with a CD that includes its installation program. If not,
STEP2: Select “Disk Management” and you will see your hard drives show “Unallocated”. Sample:750GB & 250GB hard drives. Individual Mode 11
RAID 0 Mode 12 RAID 1 Mode Creating a New Partition / Formatting The Hard Drive
STEP3: Right-click the red-squared block and selects “Initialize Disk”. Take JBOD Mode for example. (one 750GB HDD & one 250GB hard drives)
STEP6: The “New Partition Wizard” will appear. Please follow the instruction of the wizard to complete the partition. STEP7: When new parti
9.RAID Mode Selection: Jumper Selection & Storage Policy Definitions Individual Mode: It enables each hard drive to be seen separately as single
JBOD Mode:It concatenates a series of physical hard drives as a single large volume; resulting in a seamless expansion of virtual volumes beyond the p
RAID 0: It’s a combination of two physical partitions, where the data is striped between them. It presents the best data speed but no data redundancy.
RAID 1: It allows the device automatically to copy data to both hard drives. It stores all data in duplicate on separate drives to protect against da
Table of Contents: 1. Introduction...
10. Disconnecting The NexStar MX DUAL: NexStar MX Dual 3.5" HDD Enclosure: Warning: NEVER remove the NexStar MX Dual while the hard drive is in
11.Troubleshooting/ FAQ/ Warranty: NexStar MX Dual 3.5" HDD Enclosure: Q. My computer recognizes the NexStar MX Dual, but it does not assign a dr
Q. Why can't Windows 98SE read my hard drive? It works with Windows XP /2000. A. Windows 98SE cannot recognize the NTFS file system. If you wish
12. Contact: Vantec Thermal Technologies 43951 Boscell Rd. Fremont, CA 94538 Tel: 510-668-0368 Fax: 510-668-0367 website: www.vantecusa.com
1. Introduction: Vantec NexStar MX Dual Bay External HDD Enclosure is a quick and simple way to expand storage capacity to your comput
3. Specifications I Features: Specifications: Model: NST-400MX-SR Device Support: 3.5” SATA I/II Hard Drive (2) Internal Interface: Serial ATA Ext
4. System Requirements: ․Intel Pentium II 350 MHz compatible or Mac G3 processor & greater ․Microsoft Windows 2000/ XP/ VISTA or Mac OS 8.6 &
5. Interface Information: NexStar MX DuaI3.5” SATA HDD Enclosure: Power Connector USBConnector eSATA Connector On/OffSwitch USB Port Connect to a comp
6. Installation: Installation NexStar MX Dual 3.5" HDD Enclosure: Installing two hard drives into the NexStar MX Dual: 1) Release the four screws
3) Place the first HDD onto the drive caddy then insert the HDD into the SATA connector. 4) Place the second HDD onto the drive caddy then insert the
5) Secure the hard drives onto the drive caddy with screws provided. 6) Insert the drive caddy back into the aluminum housing. Be sure to align and
Comments to this Manuals