Vantec UGT-ST320R User Manual download pdf (Page 12)

UGT‐ST320R Page12

your system starts up. If the BIOS doesn’t show, please try your

controller in another PCI slot. During this (POST) process, the BIOS

will show up and indicate the devices attached to it.

Driver Installation

For Windows® 2000

or New Installation

A new installation requires a floppy disk for the driver

installation. To make this floppy disk, copy the contents of

the “

UGT-ST320R\XP_2003_Vista_2008 32-bit” folder, found on the

driver CD, onto a blank floppy disk then follow the directions below.

1. Setup the RAID Array prior to Windows installation.

2. Follow Windows® 2000 installation procedure.

3. At the Windows® 2000 Setup screen, press F6 to install the RAID

driver.

4. When prompted, press S to specify the location of the driver.

5. Insert the floppy disk, then press Enter.

6. Select Silicon Image SiI 3x12 SATARaid Controller for

Windows 2000, then press Enter.

7. Press Enter again to finish driver installation, then follow the

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 18 19 20

No comments

Vantec UGT-ST320R User Manual Page 12