Vantec 6-Port SATA II 150 PCI Host Card w/RAID User Manual download pdf (Page 10)

UGT-ST310R Page 10

use existing hard drive(s) with data. To create a RAID 0+1 set

four hard drives are required.

Auto configuration (recommended)

The default chunk size is 64k when selecting Auto

configuration.

1. As the BIOS boots press Ctrl+S or F4 when prompted to

enter the RAID BIOS.

2. At the next screen select Create RAID Set, then press

Enter.

3. Select RAID10, then press Enter.

4. Select Auto configuration, then press Enter.

5. Input the RAID size, press Enter.

6. When asked Are You Sure(Y/N)?, press Y to accept.

7. Press Ctrl+E to exit the BIOS.

8. When asked Are you sure to exit(Y/N)?, press Y to exit

and reboot.

9. Continue with FDISK and FORMAT steps as if you were

installing a conventional hard drive.

Manual configuration

1. As the BIOS boots press Ctrl+S or F4 when prompted to

enter the RAID BIOS.

2. At the next screen select Create RAID Set, then press

Enter.

3. Select RAID10, then press Enter.

4. Select the number of drives then press Enter.

5. Select Manual configuration then press Enter.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 19 20

No comments

Vantec 6-Port SATA II 150 PCI Host Card w/RAID User Manual Page 10