Vantec 6-Port SATA II 150 PCI Host Card w/RAID User Manual download pdf (Page 13)

UGT-ST310R Page 13

and reboot.

15. Continue with FDISK and FORMAT steps as if you were

installing a conventional hard drive.

CONCATENATION (JBOD)

This RAID array allows you to use one, two, three or four hard

drives to a array. It does not provide any data protection or

performance improvement but can be useful for utilizing leftover

space on disks.

1. As the BIOS boots press Ctrl+F4 or F4 when prompted to

enter the RAID BIOS.

2. At the next screen select Create RAID Set, then press

Enter.

3. Select CONCATENATION, then press Enter.

4. Select the number of drives then press Enter.

5. Select the first drive, press Enter.

6. If applicable select the 2nd, 3rd, 4th drive pressing enter

after each selection.

7. When asked Are You Sure(Y/N)?, press Y to accept.

8. Press Ctrl+E to exit the BIOS.

9. When asked Are you sure to exit(Y/N)?, press Y to exit

and reboot.

10. Continue with FDISK and FORMAT steps as if you were

installing a conventional hard drive.

Deleting RAID Arrays

1. As the BIOS boots press Ctrl+S or F4 when prompted to

enter the RAID BIOS.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 19 20

No comments

Vantec 6-Port SATA II 150 PCI Host Card w/RAID User Manual Page 13