Vantec UGT-IS100R User Manual download pdf (Page 13)



UGT-IS100R Page13

up. During this (POST) process, the BIOS will show up and

indicate the devices attached to it.

Driver Installation

For Windows® 2000, XP and Server 2003

or A New Installation

A new installation requires a floppy disk for the driver

installation. To make this floppy disk, copy the contents of

the “UGT-IS100R\2000_XP_2003_Vista\Floppy32” folder,

found on the driver CD, onto a blank floppy disk then follow

the directions below.

1. Setup the RAID Array prior to Windows installation.

2. Follow Microsoft’s Windows installation procedure.

3. At the Windows Setup screen, press F6 to install the RAID

driver.

4. When prompted, press S to specify the location of the driver.

5. Insert the floppy disk, then press Enter.

6. Select (Windows 2000) RAID Driver for JMicron JMB363

Controller or (Windows XP/2003) RAID/AHCI Driver for

JMicron JMB36X Controller, then press Enter.

7. Press Enter to finish driver installation, then follow the

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 21 22

No comments

Vantec UGT-IS100R User Manual Page 13