Vantec UGT-IS100R User Manual download pdf (Page 6)



UGT-IS100RPage6

CON3

1-2 close Enable SATA Port

CON2

J5-J8

2-3 close Enable SATA Port

CON4

Hardware Installation

1. Turn Off the power to your computer.

2. Unplug the power cord and remove your computer’s cover.

3. Remove the slot bracket from an available PCI-E slot.

4. To install the bard, carefully align the card’s bus connector

with the selected PCI-E slot on the motherboard. Push the

board down firmly.

5. Attach your internal or external devices to the 4+1 SATA II

300 IDE/PATA PCI-E Combo Host Card w/ RAID & Port

Multiplier .

6. Replace the slot bracket’s holding screw to secure the card.

7. Replace the computer cover and reconnect the power cord.

1 2 3 4 5 6 7 8 9 10 11 ... 21 22

No comments

Vantec UGT-IS100R User Manual Page 6