Vantec UGT-ST320R User Manual download pdf (Page 10)

UGT‐ST320R Page10

Rebuilding a Failed Mirror Set

When a failure to one member occurs, you will be notified either by the

RAID BIOS during boot or by the SATARAID GUI while in

Windows. The steps below will guide you in rebuilding a failed mirror

set.

1. Replace the failed drive with one of equal or greater capacity, then

start the computer.

2. During boot press Ctrl+S or F4 to enter the RAID BIOS.

3. Select Rebuild Mirrored Set then press Enter.

4. Select the desired set and then press Enter.

5. When asked Are You Sure(Y/N)?, press Y to confirm.

6. The set will be rebuilt.

Deleting RAID Arrays

1. As the BIOS boots press Ctrl+S or F4 when prompted to enter

the RAID BIOS.

2. Select Delete RAID Set, then press Enter.

3. Select the RAID set then press Enter.

4. When asked Are You Sure(Y/N)?, press Y to confirm.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 19 20

No comments

Vantec UGT-ST320R User Manual Page 10